Sample Data – Geospatial Modeling & Visualization / A Method Store for Advanced Survey and Modeling Technologies Thu, 22 Mar 2018 11:51:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 University of Arkansas – Vol Walker Building – Exterior /region-data/region/united-states/university-of-arkansas-vol-walker-building-exterior-2/ Wed, 28 Mar 2012 17:49:15 +0000 /?p=5618 Continue reading ]]> Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the exterior of the building which were collected with the Leica C10 Scan Station scanner. The project includes multiple floors within the building interior as well as the building exterior.Exterior scans were collected with a point spacing of approximately 5-10 cm. The data sets have been separated due to file size and data density. Interior scans were collected with a point spacing that ranged from less than a centimeter at the most dense (at a range of < 1 meter) to approximately 5 cm at the least dense (at a range of 25 meters). These scans were then reduced to a more consistent point spacing of 1 cm for potential future use in historical preservation documentation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vol_Walker_Building_Exterior .zip (41.9 mb) (7.5 cm spacing in .pts file format)

Sitemap_Vol_Walker_Exterior.htm -Explore the data set in Leica TruView, which requires Leica TruView free viewer and Internet Explorer.  For instructions on using the free TruView data viewer and for a complete list of links to the TruView data related to this project, please see: Accessing Vol Walker Interior TruViews.

Please note. This data is distributed under a Creative Commons 3.0 License  (seehttp://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here.  You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:

Credits:

Data was collected in collaboration with University of Arkansas Facilities Management, Operations and Maintenance and Campus Planning Divisions with outstanding assistance from Bob Harris, Construction Coordinator.

]]>
University of Arkansas – Vol Walker Building – Interior Basement Level /scanning/university-of-arkansas-vol-walker-building-interior-basement-level-3/ Wed, 28 Mar 2012 17:32:28 +0000 5 meters]]> /?p=5603 Continue reading ]]> Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the basement or ground floor of the interior, which were collected with the Z+F 5005i Scanner. The project includes multiple floors within the building interior as well as the building exterior. Interior scans were collected with a point spacing that ranged from less than a centimeter at the most dense (at a range of < 1 meter) to approximately 5 cm at the least dense (at a range of 25 meters). These scans were then reduced to a more consistent point spacing of 1 cm for potential future use in historical preservation documentation. Exterior scans were collected with a point spacing of approximately 5-10 cm. The data sets have been separated due to file size and data density.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vol_Walker_Building_Interior_Basement .zip (4.4 mb) (1 cm spacing in .pts file format)

Sitemap_Vol_Walker_Basement.htm -Explore the data set in Leica TruView, which requires Leica TruView free viewer and Internet Explorer.  For instructions on using the free TruView data viewer and for a complete list of links to the TruView data related to this project, please see: Accessing Vol Walker Interior TruViews.

Please note. This data is distributed under a Creative Commons 3.0 License  (seehttp://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here.  You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:

Credits:

Data was collected in collaboration with University of Arkansas Facilities Management, Operations and Maintenance and Campus Planning Divisions with outstanding assistance from Bob Harris, Construction Coordinator.

 

 

]]>
University of Arkansas – Vol Walker Building – Interior Basement Level /region-data/region/united-states/university-of-arkansas-vol-walker-building-interior-basement-level-2/ Wed, 28 Mar 2012 17:32:28 +0000 /?p=5603 Continue reading ]]> Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the basement or ground floor of the interior, which were collected with the Z+F 5005i Scanner. The project includes multiple floors within the building interior as well as the building exterior. Interior scans were collected with a point spacing that ranged from less than a centimeter at the most dense (at a range of < 1 meter) to approximately 5 cm at the least dense (at a range of 25 meters). These scans were then reduced to a more consistent point spacing of 1 cm for potential future use in historical preservation documentation. Exterior scans were collected with a point spacing of approximately 5-10 cm. The data sets have been separated due to file size and data density.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vol_Walker_Building_Interior_Basement .zip (4.4 mb) (1 cm spacing in .pts file format)

Sitemap_Vol_Walker_Basement.htm -Explore the data set in Leica TruView, which requires Leica TruView free viewer and Internet Explorer.  For instructions on using the free TruView data viewer and for a complete list of links to the TruView data related to this project, please see: Accessing Vol Walker Interior TruViews.

Please note. This data is distributed under a Creative Commons 3.0 License  (seehttp://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here.  You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:

Credits:

Data was collected in collaboration with University of Arkansas Facilities Management, Operations and Maintenance and Campus Planning Divisions with outstanding assistance from Bob Harris, Construction Coordinator.

 

 

]]>
University of Arkansas – Vol Walker Building – Interior Floor 3 /region-data/region/united-states/university-of-arkansas-vol-walker-building-interior-floor-3-2/ Wed, 28 Mar 2012 17:25:57 +0000 /?p=5600 Continue reading ]]> Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the third floor of the interior, which were collected with the Z+F 5005i Scanner. The project includes multiple floors within the building interior as well as the building exterior. Interior scans were collected with a point spacing that ranged from less than a centimeter at the most dense (at a range of < 1 meter) to approximately 5 cm at the least dense (at a range of 25 meters). These scans were then reduced to a more consistent point spacing of 1 cm for potential future use in historical preservation documentation. Exterior scans were collected with a point spacing of approximately 5-10 cm. The data sets have been separated due to file size and data density.

 

 

 

 

 

 

 

 

 

 

 

 

 

Vol_Walker_Building_Interior_Floor_3 .zip (4.4 mb) (1 cm spacing in .pts file format)

Sitemap_Vol_Walker_Floor_3.htm -Explore the data set in Leica TruView, which requires Leica TruView free viewer and Internet Explorer.  For instructions on using the free TruView data viewer and for a complete list of links to the TruView data related to this project, please see: Accessing Vol Walker Interior TruViews.

Please note. This data is distributed under a Creative Commons 3.0 License  (seehttp://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here.  You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:

Credits:

Data was collected in collaboration with University of Arkansas Facilities Management, Operations and Maintenance and Campus Planning Divisions with outstanding assistance from Bob Harris, Construction Coordinator.

]]>
University of Arkansas – Vol Walker Building – Interior Floor 2 /region-data/region/united-states/university-of-arkansas-vol-walker-building-interior-floor-2-2/ Tue, 30 Aug 2011 00:50:10 +0000 /?p=3634 Continue reading ]]>  

Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation.  Here are merged scans of the second floor of the interior, which were collected with the Z+F 5005i Scanner.  The project includes multiple floors within the building interior as well as the building exterior.  Interior scans were collected with a point spacing that ranged from less than a centimeter at the most dense (at a range of < 1 meter) to approximately 5 cm at the least dense (at a range of 25 meters).  These scans were then reduced to a more consistent point spacing of 1 cm for potential future use in historical preservation documentation.  Exterior scans were collected with a point spacing of approximately 5-10 cm.  The data sets have been separated due to file size and data density.

Vol_Walker_Building_Interior_Floor_2 .zip (2.81 gb) (1 cm spacing in .pts file format)

Sitemap_Vol_Walker_Floor_2.htm -Explore the data set in Leica TruView, which requires Leica TruView free viewer and Internet Explorer.  For instructions on using the free TruView data viewer and for a complete list of links to the TruView data related to this project, please see: Accessing Vol Walker Interior TruViews.

Please note. This data is distributed under a Creative Commons 3.0 License  (seehttp://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here.  You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:

Credits:

Data was collected in collaboration with University of Arkansas Facilities Management, Operations and Maintenance and Campus Planning Divisions with outstanding assistance from Bob Harris, Construction Coordinator.

]]>
University of Arkansas – Vol Walker Building – Interior Floor 1 /region-data/region/united-states/university-of-arkansas-vol-walker-building-interior-floor-1-2/ Tue, 30 Aug 2011 00:15:53 +0000 /?p=3626 Continue reading ]]>  

Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation.  Here are merged scans of the first floor of the interior, which were collected with the Z+F 5005i Scanner.  The project includes multiple floors within the building interior as well as the building exterior.  Interior scans were collected with a point spacing that ranged from less than a centimeter at the most dense (at a range of < 1 meter) to approximately 5 cm at the least dense (at a range of 25 meters).  These scans were then reduced to a more consistent point spacing of 1 cm for potential future use in historical preservation documentation.  Exterior scans were collected with a point spacing of approximately 5-10 cm.  The data sets have been separated due to file size and data density.

 

 

 

 

 

Vol_Walker_Building_Interior_Floor_1 .zip (2 gb) (1 cm spacing in .pts file format)

Sitemap_Vol_Walker_Floor_1.htm -Explore the data set in Leica TruView, which requires Leica TruView free viewer and Internet Explorer.  For instructions on using the free TruView data viewer and for a complete list of links to the TruView data related to this project, please see: Accessing Vol Walker Interior TruViews.

Please note. This data is distributed under a Creative Commons 3.0 License  (seehttp://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here.  You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:

Credits:

Data was collected in collaboration with University of Arkansas Facilities Management, Operations and Maintenance and Campus Planning Divisions with outstanding assistance from Bob Harris, Construction Coordinator.

]]>
Tiwanaku, Bolivia – Digital Elevation Model (1972) /scanning/tiwanaku-boliviadem-2/ Fri, 17 Jun 2011 21:49:48 +0000 /?p=3494 Continue reading ]]> The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia.  Read a short synopsis of the project at Tiwanaku Project Details and for full details on the entire survey, refer to Geophysics and Geomatics at Tiwanaku.

For the .jpg, .tif, or .img photogrammetry formats, we recommend the free viewer ArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data.

digital elevation model DEM made using photogrammetric techniques on 10 vertical aerial photographs of Tiwankau, Bolivia center for advanced spatial technologies CAST, University of Arkansas Adam Barnes

dem_1972_1m.tif (File size – 71 mb)

Photogrammetric processing was performed on 10 historic vertical aerial photographs from 1972 to produce this digital elevation model (DEM) covering the monumental core and surrounding areas of Tiwanaku.
Ground sample distance – 0.5-m
Coverage – 330-ha
Coordinate system – Arbitrary, based on local coordinate system used by archaeologists.

Please note. This data is distributed under a Creative Commons 3.0 License (see http://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here. You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:
Credit: Museum of Archeology and Anthropology, General Robotics, Automation, Sensing and Perception (GRASP) Lab (University of Pennsylvania) and Center for Advanced Spatial Technologies, (University of Arkansas)
Longer version: Data acquired, processed and distributed by the Center for Advanced Spatial Technologies staff and University of Pennsylvania.

 

]]>
Tiwanaku, Bolivia – Digital Elevation Model (1992) /scanning/tiwanaku-bolivia-digital-elevation-model-1992-2/ Fri, 17 Jun 2011 18:31:42 +0000 /?p=3469 Continue reading ]]>  

The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia.  Read a short synopsis of the project at Tiwanaku Project Details and for full details on the entire survey, refer to Geophysics and Geomatics at Tiwanaku.

For the .jpg, .tif, or .img photogrammetry formats, we recommend the free viewer ArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data.

digital elevation model DEM made using photogrammetric techniques on 2 vertical aerial photographs of Tiwankau, Bolivia center for advanced spatial technologies CAST, University of Arkansas Adam Barnes

dem_1992_1m.tif (File size – 26 mb)

Photogrammetric processing was performed on two historic vertical aerial photographs from 1992 to produce this digital elevation model (DEM) covering the monumental core and surrounding areas of Tiwanaku.
Ground sample distance – 1-m
Coverage – 550-ha
Coordinate system – Arbitrary, based on local coordinate system used by archaeologists.

Please note. This data is distributed under a Creative Commons 3.0 License (see http://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here. You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:
Credit: Museum of Archeology and Anthropology, General Robotics, Automation, Sensing and Perception (GRASP) Lab (University of Pennsylvania) and Center for Advanced Spatial Technologies, (University of Arkansas)
Longer version: Data acquired, processed and distributed by the Center for Advanced Spatial Technologies staff and University of Pennsylvania.

 

]]>
Tiwanaku, Bolivia – Ortho Image (1992) /scanning/tiwanaku-bolivia-photogrammetry-of-area-in-1992-2/ Tue, 14 Jun 2011 18:17:15 +0000 /?p=3348 Continue reading ]]>  

The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia. Read a short synopsis of the project at Tiwanaku Project Details and for full details on the entire survey, refer to Geophysics and Geomatics at Tiwanaku.

For the .jpg, .tif, or .img photogrammetry formats, we recommend the free viewer ArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data.

photogrammetry orthophoto from 1992 photography for Tiwanaku Bolivia made by Adam Barnes center for advanced spatial technologies CAST, University of Arkansas

ortho_1992.tif (File size – 125 mb)

Photogrammetric processing was performed on two historic vertical aerial photographs from 1992 to produce this ortho mosaic covering the monumental core and surrounding areas of Tiwanaku.
Ground sample distance – 20.4-cm
Coverage – 710-ha
Coordinate system – Arbitrary, based on local coordinate system used by archaeologists.

Average Scale Average Flying Height (m) Ground Coverage per Pixel (cm)
1992 Photos 1:16 100 2470 20.4

 

Please note. This data is distributed under a Creative Commons 3.0 License (see http://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here. You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:
Credit: Museum of Archeology and Anthropology, General Robotics, Automation, Sensing and Perception (GRASP) Lab (University of Pennsylvania) and Center for Advanced Spatial Technologies, (University of Arkansas)
Longer version:Data acquired, processed and distributed by the Center for Advanced Spatial Technologies staff and University of Pennsylvania.

]]>
Tiwanaku, Bolivia – Ortho Image (1972) /scanning/tiwanaku-bolivia-photogrammetry-of-area-in-1972-2/ Tue, 14 Jun 2011 18:13:40 +0000 /?p=3343 Continue reading ]]>  

The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia.  Read a short synopsis of the project at Tiwanaku Project Details and for full details on the entire survey, refer to Geophysics and Geomatics at Tiwanaku.

For the .jpg, .tif, or .img photogrammetry formats, we recommend the free viewer ArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data.

 

photogrammtery 1972 orthophoto tiwanaku bolivia adam barnes center for advanced spatial technologies CAST university of Arkansas

ortho_1972.tif (File size – 745 mb)

Photogrammetric processing was performed on 10 historic vertical aerial photographs from 1972 to produce this ortho mosaic covering the monumental core and surrounding areas of Tiwanaku.
Ground sample distance – 6.5-cm
Coverage – 360-ha
Coordinate system – Arbitrary, based on local coordinate system used by archaeologists.

Average Scale Average Flying Height (m) Ground Coverage per Pixel (cm)
1972 Photos 1:5 150 782 6.5

 

Please note. This data is distributed under a Creative Commons 3.0 License (see http://creativecommons.org/licenses/by-nc/3.0/ for the full license). You are free to share and remix these data under the condition that you include attribution as provided here. You may not use the data or products in a commercial purpose without additional approvals. Please attach the following credit to all data and products developed there from:
Credit: Museum of Archeology and Anthropology, General Robotics, Automation, Sensing and Perception (GRASP) Lab (University of Pennsylvania) and Center for Advanced Spatial Technologies, (University of Arkansas)
Longer version: Data acquired, processed and distributed by the Center for Advanced Spatial Technologies staff and University of Pennsylvania.

]]>