-
Primary Widget Area
-
This theme has been designed to be used with sidebars. This message will no
longer be displayed after you add at least one widget to the Primary Widget Area
using the Appearance->Widgets control panel.
- Log in
Author Archives: caitlin
Konica-Minota Vivid 9i – Check List
Note: The Konica Minolta VIVID 9i is best suited for indoor use. It will not work in direct or indirect sunlight. Any planned outdoor scanning should be done at night or under a blackout tent. The Minolta is also meant … Continue reading
Posted in Uncategorized
Konica-Minota Vivid 9i – Scanner Settings & Data Collection
This document guides you through scanner settings and collection procedures using the Konica-Minolta Vivid 9i, a turntable and Polyworks IMAlign software. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] CALIBRATION [/wptabtitle] [wptabcontent] … Continue reading
Posted in Uncategorized
Konica-Minolta Vivid 9i – Setup with turntable
This document will guide you through setting up the Konica-Minolta for use with a turntable. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] TRIPOD & MOUNT [/wptabtitle] [wptabcontent] 1. Setup the scanner … Continue reading
Octocopter – Check List
Posted in Uncategorized
Ocotcopter – Setup Operation
Posted in Uncategorized
Survey Options for GMV Technologies – Summary Table
Click on the image below to activate the interactive guide. The table summarizes the technologies referenced on the GMV, their typical applications and properties as experienced in the projects and workflows within this site.
Posted in Uncategorized
Evaluating Objectives for Data
This document will introduce you to some of the initial questions that are posed when evaluating the overall objectives for your data as they relate to processing and future use. Hint: You can click on any image to see a … Continue reading
Posted in Uncategorized
Evaluating the Project Scope
This document will introduce you to some of the initial issues involved in evaluating the overall scope of a project as it relates to data collection. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” … Continue reading
Posted in Uncategorized
Polyworks PIFEdit: Cleaning Point Cloud Data
This page will show you how to view and ‘clean’ the data in Polyworks PIFEdit. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] POLYWORKS PIFEDIT [/wptabtitle] [wptabcontent] Introducing Polyworks PIFEdit: PIFEdit is … Continue reading
Posted in Workflow
Tagged Data Processing, Data Viewing, ILRIS 3D, laser scanning, mid-range scanning, Optech, Polyworks
Optech ILRIS-3D Parser: Pre-Processing Scan Data
This page will show you how to process raw scan data from the Optech ILRIS in ILRIS Parser and how to view and ‘clean’ the data in Polyworks PIFEdit. Hint: You can click on any image to see a larger … Continue reading
Posted in Checklist
Tagged Data Processing, ILRIS 3D, mid-range scanning, Optech, Polyworks
Optech ILRIS 3D: Set up and Basic Operation
These are basic set-up and operation instructions for operating the Optech ILRIS 3D with a laptop. See the Optech Manual that accompanies the scanner for more detailed information. 1. Set up the tripod as levelly as possible 2. Attach scanner … Continue reading
Posted in Setup Operations, Workflows
Tagged Data Collection, ILRIS 3D, mid-range scanning, Optech
Optech ILRIS 3D: Equipment Checklist
Equipment Checklist – Confirm before leaving the lab!! 1. Tripod – DO NOT FORGET!!! 2. ILRIS 3D Scanner 3. Scanner Batteries – fully charged (4 total) 4. I-Bar/Battery Holder 5. Gray Battery Cable 6. Copy of Operation Manual 7. Operating … Continue reading
Posted in Checklist, Uncategorized
Leica Cyclone 7.0: Advanced Guide for Building Modeling: Modeling and Placing Repeating Features
This series will show you advanced modeling building modeling techniques using Leica’s Cyclone. Hint: You can click on any image to see a larger version. As objects become more complex, using layers (Shift + L) becomes essential to organizing and … Continue reading
Posted in Uncategorized, Workflows
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Leica Cyclone 7.0: Advanced Guide for Building Modeling: Modeling a Complex Shape
This series will show you advanced modeling building modeling techniques using Leica’s Cyclone. Hint: You can click on any image to see a larger version. As objects become more complex, using layers (Shift + L) becomes essential to organizing and … Continue reading
Posted in Uncategorized, Workflows
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Leica Cyclone 7.0: Advanced Guide for Building Modeling: Modeling Openings in Objects
This series will show you advanced modeling building modeling techniques using Leica’s Cyclone. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] SELECT OBJECT[/wptabtitle] [wptabcontent] Note that restoring the original points that are … Continue reading
Posted in Uncategorized, Workflows
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Leica Cyclone – Creating a Mesh and Modeling Surface Topography: Creating the Topographic Mesh
This series will show you how create a mesh and model surface topography in Leica’s Cyclone Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] SELECT POINTS[/wptabtitle] [wptabcontent]9. Select Points (when dealing with … Continue reading
Posted in Uncategorized, Workflows
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Using Leica’s COE Plug-in in Cyclone
This workflow will show you how to use Leica’s COE plug-in to import and export objects and points in Cyclone. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] IMPORTING & EXPORTING[/wptabtitle] [wptabcontent] … Continue reading
Posted in Leica CloudWorx, Uncategorized
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Modeling an Irregular Features – Comparing Modeled Objects to Original Points
In this series, columns in a deteriorating colonnade will be modeled by several methods. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] CLOUDWORX[/wptabtitle] [wptabcontent] Comparing Modeled Objects to Original Points in … Continue reading
Posted in Leica CloudWorx, Uncategorized
Tagged CloudWorx, Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters
Modeling an Irregular Features – Method 2
In this series, columns in a deteriorating colonnade will be modeled by several methods. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] USE THE CLOUDWORX SLICE TOOLBAR[/wptabtitle] [wptabcontent]Method 2: Slicing Single Cross … Continue reading
Posted in Leica CloudWorx, Uncategorized
Tagged CloudWorx, Leica, mid-range scanning, Scanning, scanning range >5 meters
Under Construction
Posted in Uncategorized
Leica Cyclone 7.1.1: Sub-Dividing Large Point Clouds for Autodesk Applications – Final Images from Example
This page will show you examples of sub-divided point clouds. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] TOP VIEW[/wptabtitle] [wptabcontent]VI. Final Images from Example Figure 16 – Top view of the … Continue reading
Posted in Cyclone, Scanning, Software, Uncategorized, Workflows
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Leica Cyclone 7.1.1: Sub-Dividing Large Point Clouds for Autodesk Applications – Exporting the Data
This workflow will show you how to export your sub-divided point cloud. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] CREATING PIECES AND EXPORTING DXF’S[/wptabtitle] [wptabcontent]V. Creating Pieces and Exporting DXF’s – … Continue reading
Posted in Cyclone, Scanning, Software, Uncategorized, Workflows
Tagged Cyclone, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Leica Cyclone 7.1.1: Sub-Dividing Large Point Clouds for Autodesk Applications
This workflow will explain a method of sub-dividing registered, unified point cloud data into more manageably-sized pieces. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] INITIAL CLEAN-UP[/wptabtitle] [wptabcontent]This workflow may follow “Scanning, … Continue reading
Posted in Workflows
Tagged AutoCAD, Autodesk, Cyclone, format dxf, format imp, Leica, mid-range scanning, Revit, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters, Workflow
Instructions for Using Leica’s TruView Viewer
[wptabtitle] DOWNLOAD[/wptabtitle] [wptabcontent]1. Download Leica’s FREE TruView Internet Explorer Plug-in here. NOTE: You are able to use TruView once without the plug-in; The plug-in is for Windows Internet Explorer only. 2. Open a TruView Site Map in Internet Explorer. Here … Continue reading
Posted in Leica Truview, Workflows
Tagged Leica, Leica TruView, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Using Leica’s COE Plug-In in AutoCAD
This workflow will show you how to use Leica’s COE plug-in to import and export objects and points in AutoCAD. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] INTRODUCTION[/wptabtitle] [wptabcontent] Using COE … Continue reading
Posted in Leica CloudWorx, Workflow, Workflows
Tagged CloudWorx, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
University of Arkansas – Vol Walker Building – Exterior
Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the exterior of the building which were collected with the Leica C10 Scan … Continue reading
University of Arkansas – Vol Walker Building – Interior Basement Level
Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the basement or ground floor of the interior, which were collected with the … Continue reading
University of Arkansas – Vol Walker Building – Interior Basement Level
Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the basement or ground floor of the interior, which were collected with the … Continue reading
University of Arkansas – Vol Walker Building – Interior Floor 3
Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the third floor of the interior, which were collected with the Z+F 5005i … Continue reading
Leica CloudWorx 4.2 and AutoCAD 2012 – Digitizing a Point Cloud in 2D
This workflow will show you how to install and use Leica’s Cloudworx plug-in for AutoCAD. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] WHY USE BOTH PLATFORMS[/wptabtitle] [wptabcontent]Why use both platforms? : … Continue reading
Posted in Leica CloudWorx, Workflows
Tagged CloudWorx, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters
Getting Started in the GMV
These slides will show you how to get started using the GMV. Hint: You can click on any image to see a larger version. [SlideDeck id=’4314′ width=’100%’ height=’350px’]
Posted in Uncategorized
Prezi Example
Posted in Uncategorized
University of Arkansas – Vol Walker Building – Interior Floor 2
Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the second floor of the interior, which were collected with the Z+F … Continue reading
Posted in United States, University of Arkansas, Fayetteville scanning
Tagged close range scanning, Cyclone, Data Collection, Data Processing, Data Viewing, format imp, format jpeg, format zfs, Image Processing, Imager 5006i, Leica Geosystems, Phase based, Sample Data, Scanning, Urban Infrastructure, Z+F Scanner
University of Arkansas – Vol Walker Building – Interior Floor 1
Working with the University of Arkansas’ Facilities Management and Planning Departments, CAST is documenting the historical Vol Walker Building and its renovation. Here are merged scans of the first floor of the interior, which were collected with the Z+F … Continue reading
Posted in United States, University of Arkansas, Fayetteville scanning
Tagged close range scanning, Cyclone, Data Collection, Data Processing, Data Viewing, format imp, format jpeg, format zfs, Image Processing, Imager 5006i, Leica Geosystems, Phase based, Sample Data, Scanning, Urban Infrastructure, Z+F Scanner
Tiwanaku, Bolivia – Digital Elevation Model (1972)
The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia. Read a short synopsis of the project at Tiwanaku Project Details … Continue reading
Cuzco, Peru – Vector Line Data of Past Terraces
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. tin_of_past_cuzco.zip (ESRI TIN, 1MB) Collected 2009 Vector line data of possible past terraces. Terraces are based on maps from the 1978 survey and from in … Continue reading
Posted in Cuzco, Peru GIS/RS, Peru
Tagged Archaeology/Historic Recordation, ESRI
Cuzco, Peru – TIN of Past Terraces
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. cuzco_past.zip (TIF, 2MB) Collected 2009 Triangulated Irregular Network (TIN) of possible past terraces. Terraces are based on maps from the 1978 survey and from … Continue reading
Posted in Cuzco, Peru GIS/RS, Peru
Tagged Archaeology/Historic Recordation, format tif
Cuzco, Peru – TIN with Overlaid Walls
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. walls.zip (ESRI shapefile, 2MB) Collected 2009 TIN (Triangulated Irregular Network) with verified walls overlaid in red. The view is from the tail of the puma, … Continue reading
Posted in Cuzco, Peru GIS/RS, Peru
Tagged Archaeology/Historic Recordation, ESRI, format shp
Cuzco, Peru – Georeferenced Map from 1978
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. cuzco_1978.zip (TIF, 16MB) Collected 2009 Georeferenced map from 1978 showing existing walls (slightly thicker black). Red features are walls verified by Geomatics students and mapped … Continue reading
Posted in Cuzco, Peru GIS/RS, Peru
Tagged Archaeology/Historic Recordation, format tif
Machu Picchu, Peru – Photogrammetry of Earth Temple (Texture)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Earth_Temple.zip (~740 mb) High resolution DSLR texture photos (Nikon D200 and D70) for visualization applications. Please note. This data is distributed under a Creative Commons 3.0 … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Condor Temple (Texture)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Temple_Condor.zip (~288 mb) High resolution DSLR texture photos (Nikon D200 and D70) for visualization applications. Please note. This data is distributed under a Creative Commons … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Condor Temple (Photos)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Temple_Condor.zip (~750 mb) High resolution DSLR photos (Nikon D200 and D70) for photogrammetric applications. Please note. This data is distributed under a Creative Commons 3.0 … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Main Temple (Texture)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru Main_Temple.zip (~799 mb) High resolution DSLR texture photos (Nikon D200 and D70) for visualization applications. Please note. This data is distributed under a Creative Commons … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Main Temple (Photos)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Main_Temple.zip (625 mb) High resolution DSLR photos (Nikon D200 and D70) for photogrammetric applications. Please note. This data is distributed under a Creative Commons 3.0 … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Intiwatana (Texture)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru Intiwatana.zip (~741 mb) High resolution DSLR texture photos (Nikon D200 and D70) for visualization applications. Please note. This data is distributed under a Creative Commons 3.0 … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Intiwatana (Photos)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Intiwatana.zip (~3 gb) High resolution DSLR photos (Nikon D200 and D70) for photogrammetric applications. Please note. This data is distributed under a Creative Commons 3.0 … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Temple of the Sun (Texture)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Temple_Sun.zip (~1 gb) High resolution DSLR texture photos (Nikon D200 and D70) for visualization applications. Please note. This data is distributed under a Creative Commons … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Machu Picchu, Peru – Photogrammetry of Temple of the Sun (Photos)
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. Temple_Sun.zip (~6 gb) High resolution DSLR photos (Nikon D200 and D70) for photogrammetric applications. Please note. This data is distributed under a Creative Commons … Continue reading
Posted in Machu Picchu, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Photogrammetry
Tiwanaku, Bolivia – Ortho Image (1992)
The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia. Read a short synopsis of the project at Tiwanaku Project … Continue reading
Tiwanaku, Bolivia – Ortho Image (1972)
The Center has been involved in a multi-year project in collaboration with Dr. Alexei Vranich at the University of Pennsylvania to scan and document the Pre-Incan site of Tiwanaku, Bolivia. Read a short synopsis of the project at Tiwanaku Project … Continue reading
Cuzco, Peru – Photogrammetry of Saqsaywaman
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. For the .jpg, .tif or .img photogrammetry formats, we recommend the free viewerArcGIS Explorer Desktop. This free GIS application provides ways to explore and share … Continue reading
Posted in Cuzco, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Data Viewing, Sample Data
Cuzco, Peru – Photogrammetry of Kuricancha
Data collected in 2009 as part of the Computer Modeling of Heritage Resources, Peru. For the .tif, .jpg and .img formats, we recommend the free viewerArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS … Continue reading
Posted in Cuzco, Peru photogram, Peru
Tagged Archaeology/Historic Recordation, Data Viewing, Sample Data
University of Arkansas, Fayetteville – Photogrammetry Mosaic Northwest
Data collected on December 10, 2010 by Eagle Forestry Services, Inc. Monticello, Arkansas For the geotiff (TIF) format, we recommend the free viewer ArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data. … Continue reading
Posted in United States, University of Arkansas, Fayetteville photogram
Tagged Data Viewing, format tif, Sample Data, Trimble GPS
University of Arkansas, Fayetteville – Photogrammetry Mosaic Northeast
Data collected on December 10, 2010 by Eagle Forestry Services, Inc. Monticello, Arkansas For the geotiff (TIF) format, we recommend the free viewerArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data. … Continue reading
Posted in United States, University of Arkansas, Fayetteville photogram
Tagged Data Viewing, format tif, Sample Data, Trimble GPS
University of Arkansas, Fayetteville – Photogrammetry Mosaic Northeast
Data collected on December 10, 2010 by Eagle Forestry Services, Inc. Monticello, Arkansas For the geotiff (TIF) format, we recommend the free viewerArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data. … Continue reading
Posted in United States, University of Arkansas, Fayetteville photogram
Tagged Data Viewing, format tif, Sample Data, Trimble GPS
University of Arkansas, Fayetteville – Photogrammetry Mosaic Southeast
Data collected on December 10, 2010 by Eagle Forestry Services, Inc. Monticello, Arkansas For the geotiff (TIF) format, we recommend the free viewerArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data. … Continue reading
Posted in United States, University of Arkansas, Fayetteville photogram
Tagged Data Viewing, format tif, Sample Data, Trimble GPS
University of Arkansas, Fayetteville – Photogrammetry Mosaic Southwest
Data collected on December 10, 2010 by Eagle Forestry Services, Inc. Monticello, Arkansas For the geotiff (TIF) format, we recommend the free viewerArcGIS Explorer Desktop. This free GIS application provides ways to explore and share GIS data. … Continue reading
Posted in United States, University of Arkansas, Fayetteville photogram
Tagged Data Viewing, format tif, Sample Data, Trimble GPS
University of Arkansas, Fayetteville – Photogrammetry Mosaic
Data collected on December 10, 2010 by Eagle Forestry Services, Inc. Monticello, Arkansas For the geotiff (TIF) format, we recommend ArcGIS Explorer Desktop. This viewer is a free GIS application providing ways to explore and share GIS data. UAcampusmosaic_2010.tif … Continue reading
Posted in United States, University of Arkansas, Fayetteville photogram
Tagged Data Viewing, format tif, Sample Data, Trimble GPS
Ostia Antica, Italy – Capitoline Temple
Using the Optech ILRIS-3D laser scanner and the Konica-Minolta VIVID 9i, data was collected in 2007 as part of the Ostia Antica 3D Scanning Project. Several data sets from the Ostia Antica survey are available in these posts as … Continue reading
Posted in Italy, Ostia Antica, Italy scanning
Tagged Archaeology/Historic Recordation, Data Viewing, ILRIS 3D, Optech, Polyworks, Sample Data, Vivid 9i
Ostia Antica, Italy – Baths of the Seven Sages
Using the Optech ILRIS-3D laser scanner and the Konica-Minolta VIVID 9i, data was collected in 2007 as part of the Ostia Antica 3D Scanning Project. Several data sets from the Ostia Antica survey are available in these posts as … Continue reading
Posted in Italy, Ostia Antica, Italy scanning
Tagged Archaeology/Historic Recordation, Data Viewing, ILRIS 3D, Optech, Polyworks, Sample Data, Vivid 9i
Ostia Antica, Italy – House of the Charioteers Exterior
Using the Optech ILRIS-3D laser scanner and the Konica-Minolta VIVID 9i, data was collected in 2007 as part of the Ostia Antica 3D Scanning Project. Several data sets from the Ostia Antica survey are available in these posts as … Continue reading
Posted in Italy, Ostia Antica, Italy scanning
Tagged Archaeology/Historic Recordation, Data Viewing, ILRIS 3D, Optech, Polyworks, Sample Data, Vivid 9i
Ostia Antica, Italy – Casa Giordino Insula
Using the Optech ILRIS-3D laser scanner and the Konica-Minolta VIVID 9i, data was collected in 2007 as part of the Ostia Antica 3D Scanning Project. Several data sets from the Ostia Antica survey are available in these posts as … Continue reading
Posted in Italy, Ostia Antica, Italy scanning
Tagged Archaeology/Historic Recordation, Data Viewing, ILRIS 3D, Optech, Polyworks, Sample Data, Vivid 9i
Virtual Hampson Museum, Arkansas USA – Artifact BR_1503
This data were collected as part of the Virtual Hampson Museum Project. The Virtual Hampson Museum contains nearly 450 3D digital artifacts from the collections located at Hampson Archeological Museum State Park in Wilson, AR. These artifacts were scanned … Continue reading
Virtual Hampson Museum, Arkansas USA – Artifact Ark_HM_1260A
This data were collected as part of the Virtual Hampson Museum Project. The Virtual Hampson Museum contains nearly 450 3D digital artifacts from the collections located at Hampson Archeological Museum State Park in Wilson, AR. These artifacts were scanned … Continue reading
Virtual Hampson Museum, Arkansas USA – Artifact Ark_HM_792
This data were collected as part of the Virtual Hampson Museum Project. The Virtual Hampson Museum contains nearly 450 3D digital artifacts from the collections located at Hampson Archeological Museum State Park in Wilson, AR. These artifacts were scanned … Continue reading
Virtual Hampson Museum, Arkansas USA – Artifact Ark_HM_730
This data were collected as part of the Virtual Hampson Museum Project. The Virtual Hampson Museum contains nearly 450 3D digital artifacts from the collections located at Hampson Archeological Museum State Park in Wilson, AR. These artifacts were scanned … Continue reading
Virtual Hampson Museum, Arkansas USA – Artifact Ark_HM_314
This data were collected as part of the Virtual Hampson Museum Project. The Virtual Hampson Museum contains nearly 450 3D digital artifacts from the collections located at Hampson Archeological Museum State Park in Wilson, AR. These artifacts were scanned … Continue reading
AutoCAD 2009 – Scaling and Adjusting the Coordinate System of AutoCAD Objects
This workflow is demonstrated on AutoCAD drawings for the University of Arkansas Mapping and Room Use Study in the Fall of 2010. In this case, the reference drawing is a globally accurate campus map (in engineering units). Detailed, floor plans … Continue reading
Posted in Uncategorized, Workflow
Tagged AutoCAD, Autodesk, format dwg, format dxf, Leica, mid-range scanning, Scanning, scanning range >5 meters
AutoCAD 2009 – Interface and File Structure Basics
This workflow is intended for users with minimal AutoCAD experience who want to learn the basic navigation and file logic. As with any modeling program, there are many ways to perform each function and every user has different methods/shortcuts to … Continue reading
Posted in Checklist, Leica CloudWorx, Shortcut Guide, Workflow
Tagged AutoCAD, Autodesk, CloudWorx, format dwg, format dxf, Workflow
Leica Cyclone 7.1.1 – Creating Basic Geometries Tracing Topography (2D)
This workflow will show you how to create basic geometries and trace topography in Leica’s Cyclone software. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] DEFINITIONS[/wptabtitle] [wptabcontent]Definitions: Vector Objects are geometrical primitives, … Continue reading
Posted in Workflow
Tagged Cyclone, format imp, Leica, mid-range scanning, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters, Workflow
Modeling an Irregular Feature from Point Cloud Data – Method 1
In this series, columns in a deteriorating colonnade will be modeled by several methods. Hint: You can click on any image to see a larger version. [wptabs style=”wpui-alma” mode=”vertical”] [wptabtitle] IMPORTANT NOTE ON OBJECTS IN ACAD[/wptabtitle] [wptabcontent]IMPORTANT NOTE ON OBJECTS … Continue reading
Posted in Leica CloudWorx, Workflow
Tagged AutoCAD, CloudWorx, Cyclone, Leica, mid-range scanning, Modeling, Scanning, scanning range >5 meters, scanning res 1-20+ centimeters